Print ABS and ASA with confidence
Plain-language guides to two of the most useful engineering filaments: what they are good at, how to set up your printer, and how to stop warping and cracking.
ABS vs ASA
Which one fits your part? Compare outdoor durability, printability, finishing, and cost.
Read the comparison →How to print ASA
Starting temperatures, enclosures, cooling, bed adhesion, and safe ventilation.
ASA guide →How to print ABS
Set up for ABS, keep layers bonded, and smooth parts after printing.
ABS guide →Warping & cracking
Step-by-step fixes for lifted corners and split layers.
Fix it →Why ABS and ASA?
ABS and ASA are styrene-based plastics that hold up to more heat than PLA and many PETG blends. They are popular for car parts, enclosures, brackets, tool holders, and anything that sits in a hot room or out in the sun.
They are also less forgiving to print. Both shrink as they cool, so they like a warm, draft-free space. Both give off fumes while printing, so ventilation matters. The guides on this site walk through each of those steps.
Quick picks
- Outdoor parts: ASA is usually the better choice because it is made to resist UV and weather.
- Indoor parts you want to smooth or glue: ABS is widely used and works with acetone smoothing.
- No enclosure and a first engineering filament: PETG is often an easier place to start.